WPSP-12 Patterned Stainless Steel Wall Covering
Type 304 #4 satin finish patterned stainless steel wall system.
WPSP-12 patterned stainless steel wall coverings serve a variety of functions that can be utilized in virtually any commercial building. Patterned Stainless steel wall systems are well suited for kitchens and other wet environments, but they also provide impact protection from moving carts, equipment, and pedestrian traffic. The patterned finish also adds visual appeal and it increases protection against abrasion. The WPSP-12 stainless steel wall covering system consists of wall panels, inside corners, outside corners, and edge trim for a complete installation. Stainless steel base options are also available. WPSP-12 wall panels are supplied in standard sizes and cut to fit in the field by installers, which means no prior field measuring is required. Choose from ten stainless steel patterns and our standard options below or inquire about custom options that meet your specific project requirements
Features:
- Manufactured from type 304 #4 satin finish patterned stainless steel
- Wainscot or full height installation
- 1/2-inch offset overlapping seams
- Inside corners, outside corners, and edge trim available for a complete installation
- Installed with adhesive or mechanical fasteners, pre-drilled holes available
- Other stainless steel grades and finishes available
Available options
-
SKU#:
WPSP-12
-
Material:
Type 304 #4 satin finish patterned stainless steel
-
Mounting Options:
ADH-50 silicone sealant adhesive or mechanical fasteners
-
Standard Sizes:
48-inch x 96-inch or 48-inch x 120-inch
-
More Info:
WPSP-12 wall panels are supplied in standard sizes and cut to fit in the field by installers. Custom sizes available. Other stainless steel grades and finishes available. Consult with factory for a recommended gauge.
WPS-12 Edge Bar
1/8-inch x 1-inch profile. Used as a top cap to finish the top edge of WPS-12 stainless steel wall covering. Can also be used to cap open vertical edges. Outside corners also available.
ADH-50 Adhesive
Protek ADH-50 is a one-component, low-modulus, moisture curing, advanced polymer adhesive and sealant. ADH-50 cures rapidly and delivers aggressive adhesion with most common construction substrates.
WPSP-12 Inside Corner
3 1/2-inch wing size with 1/2-inch offsets on both wings. Custom wing sizes, heights, and angles available.
WPSP-12 Outside Corner
3 1/2-inch wing size with 1/2-inch offsets on both wings. Custom wing sizes, heights, and angles available.
WPSP-12 Wainscot Wall Panel
WPSp-12 wainscot wall panels are supplied in standard lengths of 96-inches or 120-inches and modified in the field by installers. Standard wainscot height is 48-inches. Custom heights available.
WPSP-12 Full Height Wall Panel
WPSP-12 full height wall panels are supplied in standard 48-inch widths and modified in the field by installers. Standard full height panels are 96-inches or 120-inches tall. Custom heights available.
Select the files that you want to download and click “Download” to get the files.
Roll over a color or texture sample to view a larger swatch.
Click the colors or textures required for your swatch request.
Patterned Stainless Steel
5-SM
6-OM
Cambridge
Hammertone
Leathergrain
Oxford
Quilted
Stucco
TreadTex
Woodgrain
WPSP-12 Patterned Stainless Steel Wall Covering
No custom options are available for this product.
